Setting the password (continued)
3 Verify a password using the jog dial.
If the password is correct, select YES by turning the jog dial. If not, select NO. Then press the jog dial.
If you select NO, return to step 1.
If you select YES, go to step 4 in “Using the Glasstron” (page 30).
IS YOUR PASSWORD CORRECT?
123
YES
NO
SEL 
EXEC
PUSH DISPLAY
Changing the password
When the power is on, press RESET on the bottom of the power supply box with a pointed object such as a ballpoint pen.
•If you have already read the WARNING messages (page 22 through 26) (e.g., while watching a video picture), the display will return to step 1 in “Setting the password” (page 27).
•Before you read the WARNING message (e.g., you have forgotten your password), the display will return to step 3 in “Turning on the Glasstron” (page 22).
If you need to set a password after having set the Glasstron to operate without a password, follow the same procedure above.
RESET
Note
Pressing the RESET button does not affect picture or sound adjustments in PC and video mode.
