HP Network Direr Software Products manual Shortcut Symbols

186CHAPTER 5: WORKING WITH THE MAP

table lists each menu item that may appear in the menu and the associated operation.

Table 28 Pull-Right Menu Options from the Map Background.

Menu Item	Operation
Zoom in	Zooms in towards the map, centering the current selection in
	the display if applicable. See “Navigation” on page 182 for
	more information.
Zoom out	Zooms out from the map. See “Navigation” on page 182 for
	more information.
Fit to page	Centers the map on the display and zooms in or out as
	necessary so that the entire map is visible in the display. See
	“Navigation” on page 182 for more information.
Relayout	Performs an automatic relayout of the map items in the
	currently viewed submap. See “Automatic Relayout of Maps”
	on page 201 for more information.
Find	Launches the Find dialog box. This dialog box allows you to
	find items in the map by various attributes such as Name, IP or
	MAC address, and VLAN. See “Finding Items on Your
	Network” on page 192.
	Note that the Find dialog box will find items on any submap
	within the map, not just within the submap you launched the
	Find dialog box from.

Shortcut Symbols

You may have two devices on your network that are physically linked to each other, but that do not exist on the same subnet. When you are viewing the devices in your network grouped by subnets, there is no submap in which both devices are visible.

However, provided one of the devices is visible in the submap, 3Com Network Directorcan still draw the physical link between the two devices using a shortcut symbol to represent the other device.

The shortcut icon used is similar to the normal device icon, but is grayed-out, and has an arrow displayed in the lower left-hand corner. The submap that the device belongs to displays in parentheses after the device's label.