HP Network Direr Software Products manual Prioritizing Network Traffic

644CHAPTER 15: PRIORITIZING NETWORK TRAFFIC

If you have entered a DNS name then 3Com Network Director will resolve the DNS name to an IP address for you.

6Select OK in the Setup Servers step to return to the Servers step where the SAP server is now listed in the Normal list.

7Select the SAP server from the Normal list and select Set Prioritized then select Next to display the Applications step.

8Select Next to show the next step of the wizard. If the Resource Warning screen is displayed you may wish to resolve the resource warnings before proceeding. Refer to “Resource Warnings” on page 657 for more information.

9When you reach the Configuration Summary step, select Finish to apply the updated configuration to the supported 3Com devices in the map.

Blocking Access to a You have noticed that a significant amount of traffic is going to and from Streaming Audio a server that provides streams for internet radio stations. This traffic is

Server having an adverse effect upon other traffic and you wish to temporarily prevent access to the streaming audio server.

1In the Introduction step, click Next. The wizard will analyze your network and display the Configuration Type step as shown in Figure 350

2Select the Network-wide configuration radio button and click Next to show the Servers step shown in Figure 350.

3To add the streaming audio server to the list of servers, click Setup Servers from the Servers step to display the Setup Servers dialog in Figure 351.

4In the Setup Servers dialog, click Add to display the Add Server dialog in Figure 352, enabling you to add the streaming audio server.

5Type the name of the streaming audio server (or the function that it performs) into the Name: field and type either the DNS name or the IP address of the server into the DNS name/IP address field. Select OK to add the server and return to the Setup Servers step.

If you have entered a DNS name then 3Com Network Director will resolve the DNS name to an IP address for you.

6Click OK in the Setup Servers step to return to the Servers step where the streaming audio server is now listed in the Normal list.

7Select the streaming audio server from the Normal list and select Set Blocked and dismiss the warning dialog that is displayed.

8Click Next to display the Applications step.