Elmo MAN-OCSIG (Ver. 1.2) Ocarina -100

Whistle 100 Series Power Dissipation
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
Peak Current (A)
Power Dissipation (W
)
85VDC
70VDC
50VDC
3.11.1.3 How to Use the Charts
The charts above are based upon theoretical worst-case conditions. Actual test results show
30% - 50% better power dissipation.
To determine if your application needs a heatsink:
1. Allow maximum heatsink temperature to be 80 °C or less.
2. Determine the ambient operating temperature of the Ocarina.
3. Calculate the allowable temperature increase as follows:
• for an ambient temperature of 40 °C , ∆T= 80 °C – 40 °C = 40 °C
4. Use the chart to find the actual dissipation power of the drive. Follow the voltage
curve to the desired output current and then find the dissipated power.
5. If the dissipated power is below 4W the Ocarina will need no additional cooling.
Note: The chart above shows that no heatsink i s needed when the heatsink temperature is
80 °C, ambient temperature is 40 °C and heat dissipated is 4 W.
3.11.2 Castanet
The best way to dissipate heat from the Castanet is to mount it so that its lower board faces
upwards. For best results leave approximately 10 mm of space between the Castanet's lower
board and any other assembly.
Standard 40 °
°°
°C Ambient Temp.
External
Heatsink
Required
Heatsink
not
Required
Ocarina -100
Ocarina/Castanet Installation Guide Installation
MAN-OCSIG (Ver. 1.2)
3-13