Specifications | Philips VR400BMG manual

Specifications 45

Video Heads

Four heads

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 3 or 4 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

12W

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.3 lbs. (2.4 kg.)

Dimensions

14-3/16” (W) x 3-5/8” (H) x 8-3/4” (D) (360 mm x 92mm x 223mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

NOTE: Designs and specifications are subject to change without notice.

Image 45

Philips VR400BMG owner manual Specifications

Contents

VCR For Customer Use Warranty Verification Safety Precautions FeaturesIntroduction Declaration of Conformity Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenance Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast System CH3 CH4 Plug in the AC power cords of the TV and the VCR Cable Signal ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another SignalCable Box/DBS Cable Hookups With a Stereo TV Below will appear Turning on Your VCR Press the Menu button until the main menu appears Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Follow the steps below to set your VCR’s clock. Make sure Setting the Clock Your selection will flash on the screen in the AM/PM space Setting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exit OFF mode Press the Display button once Count mode Press the Display button once Clock modeOn-Screen Status Displays Remote Control Buttons Eject Button Counter RESET/EXIT ButtonTime Search Button Index Search Button VCR Display Panel Remote Sensor FWD Fast Forward Button Speed Button Power ButtonVCR/TV Button Play Button Rear Panel AC Power CordVideo OUT Jack Video in Jack Playing VHS Quasi Play Back SqpbRead and follow the steps below to play a tape 1Turn on the TV Insert a tape Recording One-Touch Recording Starting an OTRStopping an OTR Channels are set up Clock is set Timer Recording Timer Recording cont’d Repeat the procedure in to set the recording’s end timeEnter the recording’s start time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’d 42&5 Correcting a Timer Recording Set the program to be recorded On the satellite tuner Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appear Antenna Rerecording Tape Duplication Repeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still Picture Picture Select Press the Play button or the Stop button repeatedly toSelect Picture SELECT. Then, press the F.FWD button Press the Play button to watch the tape Real-Time Counter Memory Press the Index Search button Index Search Press the Time Search button Time Search Quick Find Press the QUICK-FIND buttonTo resume normal tape playback, press the Play button Automatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or Glossary Specifications Renewed Index Supplied Accessories