30 Timer Recording (cont’d)
Correcting a Timer Recording
If you need to correct a timer recording after you have finished setting the program, follow these steps. Make sure the VCR is on and is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)
1
Press the MENU button.The details of your program appear on the screen.
| TIMER PROGRAMMING | ||
| DATE | STA/END | CH |
B1 05/04 | 07:30 PM | 16 | |
| THU | 08:30 PM | SP |
3 | 05/11 | 10:00 PM | 125 |
| W THU | 10:54 PM | SLP |
5 | 05/21 | 11:00 PM | 40 |
| DAILY | 11:30 PM | SLP |
2
Press the PLAY button or the STOP button to select the timer recording you want to correct.
NOTE: If some empty program numbers exist, the lower program num- ber appears on the screen by pressing the REWIND button. In this case, you can enter the new program.
3
Press the F.FWD button.
ONE TIME PROGRAM
PROGRAM NUMBER |
| 1 |
|
| |
|
| ||||
DATE | 05/04 |
| THU | ||
START TIME 07:30 |
| PM | |||
END TIME 08:30 |
| PM | |||
CHANNEL | 16 |
|
|
|
|
REC SPEED | SP |
|
|
|
|
1
4
POWER | VCR/TV | EJECT |
1 2 3
4 5 6
7 8 9 CHANNEL
SPEED | 0 | +100 |
| |
SLOW | QUICK- | SEARCH | ||
TIME | INDEX | |||
FIND | ||||
MENU | DISPLAY | EXIT | COUNTER | |
|
| RESET | MEMORY | |
REWIND | / PLAY | F.FWD | ||
RECORD |
| / STOP | PAUSE/STILL | |
6
3
42&5
Select the information you want to change using the F.FWD button. Press the REWIND button to go back one step. (There is an exception. Do not press the REWIND button while the program number is flashing. If you do, you will cancel the timer recording completely.)
5
While the information is flashing, enter the correct infor- mation by pressing the PLAY button or the STOP button.
6
When all the information is correct, press the COUNTER RESET/EXIT button to exit. Turn off the VCR before the timer recording.
