8.Slide the system board toward the front of the chassis to disengage the connectors (2), and then lift the system board up and out of the chassis (3).

To install the system board, reverse the removal procedure.

NOTE: When replacing the system board, you must also change the chassis serial number in the BIOS.

CAUTION: When reconnecting the cables it is important that they be positioned correctly.

Changing from desktop to tower configuration

The Small Form Factor computer can be used in a tower orientation with an optional tower stand that can be purchased from HP.

1.Prepare the computer for disassembly (Preparation for disassembly on page 85).

130

Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)

Page 140
Image 140
HP E1Z75UT E1Z75UT#ABA, E1Z74UT E1Z74UT#ABA, E1Z77UT E1Z77UT#ABA manual Changing from desktop to tower configuration