4.Install four black and blue M3 isolation mounting guide screws (two on each side of the drive).
NOTE: M3 metric isolation mounting guide screws can be purchased from HP.
When replacing a drive, transfer the four M3 isolation mounting guide screws from the old drive to the new one.
5.Rotate the drive cage to its upright position.
6.Align the guide screws on the drive with the
7.Connect the power cable and data cable to the back of the hard drive.
NOTE: If the
8.Rotate the drive cage back down to its normal position.
CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.
Drives 111
