Front bezel security

The front bezel can be locked in place by installing a security screw provided by HP. To install the security screw:

1.Prepare the computer for disassembly (Preparation for disassembly on page 85).

2.If the computer is on a stand, remove the computer from the stand.

3.Remove the access panel (Access panel on page 86).

4.Remove the front bezel (Front bezel on page 87).

5.Remove one of the five silver 6-32 standard screws located on top of the drive cage.

88

Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)