Bezel blanks
Description | Spare part number |
| |
Optical drive bezel blank | 732770-001 |
| |
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to be removed before installing a drive. To remove a bezel blank:
1.Remove the access panel (Access panel on page 38)
2.Remove the front bezel (Front bezel on page 40)
3.Remove the bezel blank for the appropriate drive:
{To remove a 5.25-inch bezel blank, press inward on the retaining tabs that hold the bezel blank in place (1) then pull the bezel blank from the front bezel (2).
NOTE: After removing the 5.25-inch drive bezel blank and installing a drive, you can install an optional bezel trim piece (available from HP) that surrounds the front of the drive.