The new bonded adapter displays on the Network screen.The bonded adapter is named bondX,
where X is a number in sequential and ascending order.
Configure General and TCP/IP Settings
To configure a bonded adapter:
1. Select Network > Bonds.
2. Select settings gear icon for the bonded adapter that you want to configure.
3. From the pop-up menu that displays, select Settings.
The bond settings pop-up screen displays.
4. Configure the settings in the General tab as explained in the following table:
DescriptionItem
Cannot be edited. Displays the name of the bonded adapter.Name
Enter the MTU in bytes.The default setting is 1500 bytes.MTU
5. Click the TCP/IP tab.
6. Configure the TCP/IP settings as explained in the following table.
NETGEAR recommends that you use DHCP address reservation to make sure that
the DHCP server always assigns the same IP address to the interfaces of the
Note:
ReadyNAS.The MAC addresses of the physical interfaces are shown on the Network
screen.
System Settings
160
ReadyNAS OS 6.2