The indicator on the protocol button turns green.
When you enable a file-sharing protocol for an individual shared folder, the protocol
is also enabled globally. For more inf ormation about global settings, see Configure
Global Settings for File-Sharing Protocols on page 163.
Note:
•To save the configured access settings but prevent them from taking effect, set the On-Off slider
so that the slider shows the Off position.
The indicator on the protocol button turns gray.
When you disable a file-sharing protocol for an individual shared folder, the
protocol remains enabled globally so that you can still access other folders that
Note:
might be using the protocol. For more information about global settings, see
Configure Global Settings for File-Sharing Protocols on page 163.
8. Click the Apply button.
9. Click the OK button.
Your changes are saved and the pop-up screen closes.
Configure User and Group Settings
For SMB, AFP, FTP, and HTTP, you can configure access rights to an individual shared folder for users
and groups. User and group settings do not apply to NFS and Rsync.
You cannot configure access rights for the ReadyNAS admin ( ) or for Cloud users
( ). For more information about Cloud users, see Access Shared Folders Using
Cloud Services on page 64.
Note:
To configure user and group network access settings:
1. On the folder settings pop-up screen, click the Network Access tab.
2. Select one of the file-sharing protocol buttons:
•SMB
•AFP
•FTP
•HTTP
The screen adjusts to display the access properties for the selected protocol.
3. Click the Security tab on the left side of the pop-up screen.
Shared Folders
50
ReadyNAS OS 6.2