A pop-up screen displays.
9. Click the Schedule tab.
10. Clear the Enabled check box.
Clearing this check box forces the recovery procedure to be started manually, which ensures that the
recovery job does not happen automatically.
WARNING:
To ensure the integrity of the data stored on your primary device, never
schedule a recovery job to run automatically.
11. Click the Apply button.
Your changes are saved.
12. Click the OK button.
The pop-up screen closes.
13. Configure the recovery job as described in Configure a Backup or Recovery Job on page 211.
Because you cleared the Enable check box, you must manually start the recovery
job. For more information about manually starting a job, see Manually Start a Backup
or Recovery Job on page 219.
Note:
For more information about recovery sources, destinations, and protocols, see Basic Data Backup and
Recovery Concepts on page 204.
Backup and Recovery
210
ReadyNAS OS 6.2