Siemens V4.0 manual Wins Service Parameters, PowerFailAddress Regsz

Advanced Server Registry	WINS Service Parameters
PowerFailAddress REG_SZ	String up to 15 characters

Specifies the NetBIOS name to which the server sends a message when it receives a SIGPWR signal.

Default: * (all users)

You can change the value of this key using the AS/U Administrator.

PowerFailMessage REG_SZ String up to 500 characters

The text of the message to be sent by the server when it receives a SIGPWR signal.

Default: “The system has experienced a power failure. Please close all applications and files and log off immediately”.

You can change the value of this key using the AS/U Administrator.

PowerMessageInterval REG_DWORD 0 - infinity

Specifies the interval in minutes at which the server repeats the message sent when it receives a SIGPWR signal. A value of 0 would indicate to send the message one time only.

Default: 1

You can change the value of this key using the AS/U Administrator.

13.15 WINS Service Parameters

The registry path that contains entries for the Advanced Server WINS service is as follows:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Wins

The \Parameters subkey list all of the non-replication-related parameters needed to configure a WINS server. It also contains a \Datafiles subkey, which lists all the files that should be read by WINS to initialize or reinitialize its local database. The following parameter under the \Parameters subkey can be set only by changing the value in the Registry.

Product Manual U7613-J-Z815-6-76