Siemens V4.0 manual Start the server, Interactive or non-interactive installation

Installing Advanced Server for UNIX Installing server software (asxserver package)

Start the server

You can start the server directly during the installation or manually after the installation.

Note that after having installed a new NetBIOS, the system must have been rebooted before you can start the server.

The upgrade installation from Version 2.x needs a running server to convert the old databases into the Advanced Server for UNIX databases automatically. Further information can be found in the description of the upgrade installation from Version 2.x.

4.8.2 Upgrade installation of a primary domain controller from Version 2.x

For the upgrade installation of a primary domain controller, proceed as described below.

Data backed up from LAN Manager/X Version 2.x (e.g. user account) is taken over.

If the servers of the domain are distributed over several subnetworks, ensure that NetBIOS can resolve the names. For details on configuring NetBIOS name resolution, please refer to the section “Configuring NetBIOS Name Resolution” .

ÊLog on as system administrator root.

ÊStart the installation procedure as described in the section “Installing from CD-ROM with cdinst”.

ÊSelect the asxserver package under AS/X.

ÊStop the server.

ÊChoose y to stop the server.

Interactive or non-interactive installation

ÊChoose interactive for interactive installation.

The following description applies for interactive installation.

The system now copies the files from the installation medium and sets up specific users and user groups for Advanced Server for UNIX.

Output language

The system now displays the supported languages (ENGLISH and GERMAN) and outputs the message

Please enter the language or press ENTER if it is "ENGLISH":

ÊEnter the output language.

Product Manual U7613-J-Z815-6-76