Siemens V4.0 manual Using Windows NT Network Client Administrator

Installing Network and Administrative Client Software Creating Installation Diskettes

Replace <client-directory>with one of the following:

y

;

ÊCopy the disk images in the directory to diskette using the copydisk command whose syntax is as follows:

It [target]

●To create diskettes for LAN Manager for MS-DOS Client, type: t;yI

tI tI t

●To create diskettes for Microsoft Network Client, type: t;yI

t;yI

●To create a diskette for TCP/IP-32 for Windows for Workgroups 3.11, type: tI

●To create a diskette for the Update for Windows for Workgroups 3.11, type: t yI

8.2.1Using Windows NT Network Client Administrator

Advanced Server supports the creation of network installation startup disks using Network Client Administrator from a Windows NT computer.

Use the Network Client Administrator to perform the following tasks:

ÊCreate a network installation startup disk. With this single disk, you start a client computer, connect to a server that stores installation files, and install the full network software from that server.

ÊCreate a network installation disk set. The disk set contains all the files needed to install network client software.

ÊCopy Client-based Network Administration Tools to any computer running Windows NT Workstation or Windows NT Server for which you have administrative permissions. Clients can then install the tools by connecting to the server.

Product Manual U7613-J-Z815-6-76