Siemens V4.0 manual Example entries in names.cfg, Or as an alternative

Installing Advanced Server for UNIX Installing the prerequisited packages

Example entries in names.cfg:

# My primary domain controller

mypdc	144.145.101.10	UN
# The domain I want to join
mypdc.dom	144.145.101.10	UN #1b

i

Note that both the server name (“mypdc”) and the domain name (“mypdc.dom”) must be given together with the server's IP address.

or (as an alternative):

ÊEdit the file /var/opt/nbrfc/conf/interfaces.cfg and configure the IP address of the primary controller’s subnet in the appropriate interface section using the parameter “brdcast_list=”:

Example entry in interfaces.cfg:

[et0]

active=yes

used_by_wins=yes ip_addr=default brdcast_addr=default

# Subnet address of my primary domain controller:

brdcast_list=144.145.101.255 netmask=default

i

If the brdcast_list line is commented out (default), do not forget to uncomment the line!

To ensure that the primary domain controller can be found if this server is a WINS client:

ÊEdit the file /var/opt/nbrfc/conf/wins.cfg and add the appropriate WINS server addresses.

For detailed information on configuring name resolution, refer to section “Configuring NetBIOS Name Resolution”.

i

In any case, you should now reboot the system before proceeding with the instal- lation of the server software.

Product Manual U7613-J-Z815-6-76