Siemens V4.0 manual At the command prompt type

Configuring Advanced Server for UNIX Configuring NetBIOS

Example of /var/opt/nbrfc/conf/names.cfg:

#########################################################################

#Sample names.cfg to configure static NetBIOS names

#########################################################################

#My address is 144.145.100.10

#Primary domain controller of a trusted domain:

trustpdc	144.145.101.20	UN #00,20
trustpdc.dom	144.145.101.20	UN #1b
trustpdc.dom	144.145.101.20	GR #1c,00

# Other backup domain controllers (in remote subnet):

otherbdc1	144.145.102.30	UN
otherbdc2	144.145.102.31	UN

To configure static names on an Advanced Server for UNIX computer:

ÊIn /var/opt/nbrfc/conf, copy names.sam to names.cfg. Edit names.cfg and fill in all NetBIOS name mappings that are needed for the the local machine.

ÊAt the command prompt; type

The static name table from names.cfg is loaded automatically whenever NetBIOS starts, e.g. at system startup.

To verify that the mappings from names.cfg are known to NetBIOS:

ÊAt the command prompt; type

Product Manual U7613-J-Z815-6-76