Siemens V4.0 manual Software requirements, System, Software version, Product name Meaning

Installing Advanced Server for UNIX Hardware and software requirements

4.2.2 Software requirements

The software listed below must be installed on the server system in order to run Advanced Server for UNIX:

System

RM200

RM300

RM400 RM600-xxx

software version

Reliant UNIX-N V5.43C0 and later Reliant UNIX-N V5.43C0 and later Reliant UNIX-N V5.43C0 and later Reliant UNIX-Y V5.43C0 and later

If you would like to use the “shared printer” resource with Advanced Server for UNIX, you must configure one of the following spoolers before installing Advanced Server for UNIX:

Product name	Meaning
AT&T spooler	Standard spooler
SPOOL V4.2B or Xprint 5.0 (and later)	Siemens Spooler package

The following software package must be installed before installing Advanced Server for UNIX:

Product name	Meaning
CDS++RTS V1.0B00 (and later)	Reliant UNIX C++ Runtime system

When the WINS Service is to be used then one of the following software packages must be installed before installing Advanced Server for UNIX:

Product name	Meaning
DCE-THR V2.0A20 (or later)	from the CD-SYS-MI from 8/97
SIthreads	delivered with the operating system

!	This package is only necessary if the machine should run the Advanced Server for
	UNIX WINS service.

The “SIthreads“ package is included on the operating system CD with more recent operating system versions. This package replaces the previous version “DCE-THR“. In this case, you should only use the “SIthreads“ package.

Product Manual U7613-J-Z815-6-76