Siemens V4.0 manual Installing with the default configuration

Installing Advanced Server for UNIX Installing optional packages

4.10 Installing with the default configuration

You can install the asxserver, asxtools, or asxtoolsD and msclients packages with a default configuration without any further input.

i

The default parameters for all packages are listed at the end of this section.

Carry out the following steps in the given sequence:

1.Log on as system administrator root and insert the CD in the drive of the system, from which you want to install the software.

2.Start the installation program with cdinst. The following dialog box is displayed:

	1	Process Multi-Product CD-ROM
Server:		local
CD-ROM device name: /dev/ios0/sdisk005s0
Remote pathname/
Local mountpoint:		/cdrom0

Fill in the form and then press SAVE.

ÊPosition the cursor on CD-ROM device name and select the device name for the CD-

ROM drive with	F2	(CHOICES). Then select F3 (SAVE) in order to confirm
your entry. You are then given a general message about the volume.
Ê Acknowledge with	F8	(CONTINUE).

3. Use the cursor to mark the ASX set in the list displayed and then press F2 (MARK)

and		F3	(ENTER). The following is displayed:
	2
info			- Display Detailed Product Information
pkginfo			- Display Detailed Information on Packages
README			- Display README Files
install			- Install Products

Move the cursor to the item you want and press ENTER to select it.

Product Manual U7613-J-Z815-6-76