Visioneer 430 manual Canceling a Configure Before Scan

38VISIONEER PATRIOT 430 SCANNER USER’S GUIDE

CANCELING A CONFIGURE BEFORE SCAN

1.Click Cancel in the scanning progress window.

2.The following window will open asking if you want to cancel the entire job.

■Yes—Scanning stops and all pages scanned in this batch, up to this point, will be deleted. The TWAIN interface will close and you can restart your scan from the beginning.

For instance, the scan Mode is Black & White but you want to scan your documents in color. Choose Yes to delete any scanned pages, then start over the correct scan Mode selected.

■No—Scanning stops and the TWAIN interface remains open. You can place a new set of pages into the ADF, adjust the TWAIN settings for them, then click the Scan button in the TWAIN interface to continue scanning. At the end of the scanning batch, all pages from the first portion of the scan and second will be sent to the Destination Application.

Choose this option if, for instance, you have been scanning in Black & White but want to scan the remaining pages in color. You stop the current scan, change the scan Mode to Color, then restart the scanning without losing the pages already scanned.