REPLACING THE ROLLER ASSEMBLY 79

5.Discard the worn roller. It cannot be repaired.

6.Before installing the new roller, clean any dust that may have gotten on it during shipping.

7.To install the new roller, insert the right end of the roller into its housing socket. Make sure the lock tab is facing up and the lock flange is not obstructed. If the gears on the end of the roller do not engage easily, slightly rotate the roller while gently pressing it into the housing until you feel them engage. Do not force the gears to engage.

Page 84
Image 84
Visioneer 430 manual Replacing the Roller Assembly