Visioneer 430 manual Select Configure Before Scan

36VISIONEER PATRIOT 430 SCANNER USER’S GUIDE

CONFIGURE BEFORE SCAN

Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when you press or click a button. You can then use the interface to change the Picture Type, Resolution, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the OneTouch Properties window for that button.

TO SET CONFIGURE BEFORE SCAN

1.Open the OneTouch Properties window.

2.Using the button selection arrows, choose the button that you want to set to configure before scanning.

3.Select the scan configuration Configure Before Scan.

Click the arrows to select the button.

Select Configure

Before Scan.

Right-click on Configure Before Scan to get the menu, and choose the interface to use for scanning.

4.Right-click on Configure Before Scan and choose an interface to use for configuring before scanning.

TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. Please see “Scanning from the TWAIN Interface” on page 68 for detailed instructions about scanning with the TWAIN Interface.