TROUBLESHOOTING 83
Patriot 430 Scanner Parts List” on page 88 for the ordering number. See “Replace the ADF Pad Assembly” on page 77 for the steps to replace the pad.
Problem: If the USB cable is disconnected during a scan, the scanner does not reconnect when the USB cable is plugged back in.
Unplug the power cable from the scanner, and then plug it back in.
If the scanner does not reconnect:
1.Unplug the power cable from the scanner.
2.Restart your computer.
3.After the restart is complete, plug the power cable back in.
STATUS LIGHT TROUBLESHOOTING CODES
A green status light indicates the normal state of the scanner.
Normal Operation
■Blinking green: indicates the scanner is waking up from power saving and preparing to scan.
■Steady green: indicates the scanner is ready to scan.
Error Codes
If your scanner experiences hardware problems, the status light will blink red, and the LED flashes an “E” and the error code number.
The LED blinks back and forth between “E” and the error code number (such as 8).
The red light flashes the number of times as the error code (8 in this example).
