Pioneer DEH-P8400MP operation manual About the demo mode, Reverse mode, Feature Demo, Motion Demo

Models: DEH-P8400MP

1 124
Download 124 pages 52.04 Kb
Page 14
Image 14

Section

01Before You Start

About the demo mode

This product features three demonstration modes: Reverse mode, Feature DEMO and Motion DEMO.

Reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.

Pressing 5 numbered button when power to this product is switched off while the ignition switch is set to ACC or ON cancels the Reverse mode.

Pressing 5 numbered button again to start the Reverse mode.

Feature DEMO

Pressing 4 numbered button when power to this product is switched off while the ignition switch is set to ACC or ON starts the Feature DEMO.

Motion DEMO

Pressing 6 numbered button when power to this product is switched off while the ignition switch is set to ACC or ON starts the Motion DEMO. If the Motion DEMO is set to ON, front panel opens/closes automatically in each about 30 minutes.

Notes

Remember that if the Feature DEMO or Motion DEMO continues operating when the car engine is switched off, it may drain battery power.

The red lead (ACC) of this product should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.

Feature DEMO and Motion DEMO are set to OFF initially. If you turn off the ignition switch or power to this product is switched off,

Feature DEMO and Motion DEMO return to off automatically.

14En

Page 14
Image 14
Pioneer DEH-P8400MP operation manual About the demo mode, Reverse mode, Feature Demo, Motion Demo