![](/images/new-backgrounds/1007021/702157x1.webp)
Multi-CD Player
Playing a CD
12 3
You can use this unit to control a
These are the basic steps necessary to play a CD with your
1DISC NUMBER indicator
Shows the disc currently playing.
2PLAY TIME indicator
Shows the elapsed playing time of the cur- rent track.
3TRACK NUMBER indicator
Shows the track currently playing.
1Press SOURCE to select the multi-CD player.
Press SOURCE until you see
2Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume.
3Select a disc you want to listen to with the
1to 6 buttons.
For discs located at 1 to 6, press the correspond- ing number button.
If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display.
• You can also sequentially select a disc by pressing 5/∞.
Section
06
4 To perform fast forward or reverse, press and hold 2 or 3.
5 To skip back or forward to another track, | English | |
press 2 or 3. | ||
| ||
Pressing 3 skips to the start of the next track. |
| |
Pressing 2 once skips to the start of the current |
| |
track. Pressing again will skip to the previous |
| |
track. | Español | |
Notes | ||
• When the | ||
| ||
preparatory operations, Ready is displayed. |
| |
• If the |
| |
erly, an error message such as | Deutsch | |
be displayed. Refer to the | ||
owner’s manual. | ||
• If there are no discs in the | ||
magazine, NO DISC is displayed. | ||
|
| Français |
are supported for | |
Only those functions described in this manual |
|
| Italiano |
| Nederlands |
En 29