![](/images/new-backgrounds/1007021/702185x1.webp)
Section
Audio Adjustments
07
Adjusting source levels
SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radi- cal changes in volume when switching between sources.
•Settings are based on the volume level of the FM tuner, which remains unchanged.
1Compare the FM tuner volume level with the level of the source you wish to adjust.
2Press OPEN to open the front panel.
3Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
4Press 5 or ∞ to adjust the source volume. Each press of 5 or ∞ increases or decreases the source volume.
• SLA +4 – SLA
Notes
•Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner.
•The AM tuner volume level can also be adjusted with source level adjustments.
•The
•External unit 1 and External unit 2 are set to the same volume adjustment setting automat- ically.
Using automatic sound levelizer
During driving, noise in the car changes accord- ing to the driving speed and road conditions. The automatic sound levelizer (ASL) monitors such varying noise and automatically increases the volume level, if this noise becomes greater. The sensitivity (variation of volume level to noise level) of ASL can be set to one of five levels.
1Press OPEN to open the front panel.
2Press AUDIO to select ASL.
Press AUDIO until ASL appears in the display.
3Press 5 to turn ASL on.
• To turn ASL off, press ∞.
4Press 2 or 3 to select the desired ASL level.
Press 2 or 3 repeatedly to switch between the following settings:
Low
English
Español
Deutsch Français Italiano
Nederlands
En 43