JVC LET0141-002A manual Test tone available only while setting Level or Delay

Setting and adjustment

English

Français

In Test tone mode, you hear pink noise, which includes all frequencies in the audible range, from the speakers. This is not a malfunction.

The test tone is not output from the SUBWOOFER output.

5 Test tone (available only while setting LEVEL or DELAY)

You can check the level or delay setting by
monitoring the test tone.		PREFERENCE1	PREFERENCE2	SPK.SETTING
				EXPERT
1 Select [TEST TONE] using	, then press			LEVEL
				DELAY
ENTER .				F. SP	0db
				C. SP	0db
The color of "TEST TONE" changes.
				R. SP	0db
				S.WOOFER	0db

			PRESS KEY	TEST TONE
2 Select the desired speaker(s) using			.
•	F.SP:	front speakers
•	C.SP:	center speaker
•	R.SP:	rear speakers

After selecting the Test tone, if you do not move the cursor, the test tone is output from each speaker one by one.

In Test tone mode, if you move	down from “R.SP” position, the test tone
continues to output from the rear speakers as long as			is any position other
than “F.SP” and “C.SP”. Similarily, if you move		up from “F.SP” position,
the test tone continues to output from the front speakers as long as				is any
position other than “C.SP” and “R.SP”.

3 Set the level or delay using again, if necessary.

Setting and adjustment

NOTES

¦To exit the test tone mode

Move to [TEST TONE] in the on-screen display and press ENTER until [TEST TONE] returns to its original color.

63