JVC LET0141-002A manual Speaker size available only when selecting Expert, Woofer

Setting and adjustment

English

Français

1 Speaker size (available only when selecting EXPERT)

Sets the speaker size according to your speakers.

1 Select the speaker to be set using			.
•	F.SP:	front speakers
•	C.SP:	center speaker
•	R.SP:	rear speakers

PREFERENCE1		PREFERENCE2	SPK.SETTING
			EXPERT
			LEVEL
			DELAY
	BASS		F. SP	Large
			C. SP	Small
			R. SP	Small
			BASS	S.woofer
PRESS	KEY		TEST TONE

2 Select the size using .

•Large: large speaker(s) which can fully reproduce the low-frequency range.

•Small: small speaker(s) which can not fully reproduce the low-frequency range.

•None: No speaker(s) connected.

If you set the front speakers to “Small”, you cannot set the other speakers to “Large”.

2 Bass redirect (available only when selecting EXPERT)

When you use small speakers which do not
fully reproduce the low-frequency range,					PREFERENCE1		PREFERENCE2	SPK.SETTING
you can boost up the low-frequency signals								EXPERT
								LEVEL
of the sub-woofer or front speakers
								DELAY
						BASS		F. SP	Large
1 Select [BASS] using			.					C. SP	Small
								R. SP	Small	Setting and	adjustment
								BASS	S.woofer
2 Select Sub-woofer or L/R using				.	PRESS	KEY		TEST TONE
•	S.woofer:	the low-frequency signals
		fed from the sub-woofer
		output are boosted up.
•	L/R:	the low-frequency signals fed from the front speaker output are
		boosted up.

The “Bass redirect” setting is effective only when at least any one of the speaker sizes is set to “Small”. If none of them is set to “Small”, this setting is not activated (“None” appears in the setting field).

Please note that when playing back a Dolby Digital disc, LFE (Low Frequency Effect) signals are fed from the SUBWOOFER output even if “BASS” shows “None” or “L/R”. So you may use a sub-woofer even in such case.

If the front speaker size is set to “Small”, the Bass redirect setting is fixed to “S.woofer”.

61