JVC LET0141-002A manual Speaker level available only when selecting Expert, Woofer sub-woofer

Setting and adjustment

3 Speaker level (available only when selecting EXPERT)

For the speaker(s) whose size is set to “None”, Speaker level and Delay cannot be set (“——” appears in the setting field).

However, when playing back a Dolby Digital disc, LFE singal is output from SUBWOOFER output even if S. WOOFER shows “——”, allowing to activate a sub-woofer connected. In such case, adjust the output level using the level control on the sub-woofer.

You can adjust the output level of each
speaker.			PREFERENCE1		PREFERENCE2	SPK.SETTING
						EXPERT
1 Select [LEVEL] using		, then press	ENTER .			LEVEL
						DELAY
The color of "LEVEL" changes.				BASS		F. SP	0db
						C. SP	0db
						R. SP	0db
2 Select the desired speaker(s) to be set						S.WOOFER	0db
			PRESS	KEY		TEST TONE
using	.

•F.SP: front speakers. the level is fixed to 0db.

•C.SP: center speaker

• R.SP: rear speakers

•S.WOOFER: sub-woofer

The setting range is -6 db to +6 db in 1 db units.

3 Set the level using .

Delay of S.WOOFER cannot be set.

4 Delay (available only when selecting EXPERT)

You can adjust the delay time of each
speakers.	PREFERENCE1 PREFERENCE2 SPK.SETTING

					EXPERT
1 Select [DELAY] using		, then press	ENTER .		LEVEL
					DELAY
The color of "DELAY" changes.				BASS	F. SP	0mS
					C. SP	0mS
					R. SP	0mS
2 Select the desired speaker(s) to be set					S.WOOFER	0mS
			PRESS	KEY	TEST TONE
using	.

•F.SP: front speakers. the delay is fixed to 0ms.

•C.SP: center speaker (selectable from 0 to -5 mS in 1 mS units)

•R.SP: rear speakers (selectable from 0 mS, -5mS, -10 mS, and -15 mS)

3 Set the delay time using .

NOTES

¦To exit the speaker level (or delay) setting mode

Move to [LEVEL] (or [DELAY]) in the on-screen display and press ENTER until [LEVEL] (or [DELAY]) returns to its original color.

62