Speaker setting | JVC LET0141-002A guide

Setting and adjustment

Speaker setting

You can make speaker setting according to your system. Normally, simply select “5.1 CHANNEL” or “2 CHANNEL”. However, if you select “EXPERT”, you can set various settings to match your speakers.

SPEAKER CHANNELS

You can select the speaker channels according to the speaker system connected to

•2 CHANNEL

When you connect to a 2-channel amplifier, or use 2 speakers.

PREFERENCE1		PREFERENCE2	SPK.SETTING
			5.1 CHANNEL
			LEVEL
			DELAY
			F. SP	Large
			C. SP	Small
			R. SP	Small
			BASS	S.woofer
PRESS	KEY		TEST TONE

•5.1 CHANNEL

When you connect to a 5.1-channel amplifier and use the front, rear , center and sub-woofer speakers.

•EXPERT

When you want to set the various settings to match your speakers. The following five setting items are available.

NOTES

¦When selecting 5.1 CHANNEL or EXPERT, set DOWN MIX to OFF (see page 57).

¦Dolby Digital LFE (Low Frequency Effect) signals are always fed from the SUBWOOFER output on the rear panel of the unit regardless of speaker setting.

¦When playing back digital audio output signals of the unit using an external decoder, speaker setting above is invalid. Make setting of the external decoder properly.

60

Image 64

JVC LET0141-002A manual Speaker setting, When you connect to a 2-channel amplifier, or use 2 speakers

Contents

XV-D701BK Mises en garde, précautions et indications diverses Introduction Table of contents Playing a scene close-up Checking the total disc time Features Using the instructions Changing the language and sound Installation of the unit Power cordAvoid high temperatures When you’re away Preliminary knowledge Names of parts and controls Front panel Display window Rear panel Remote control unit Audio Volume button Cancel buttonCATV/SAT Power button DVD/TV/CATV switch 24 Preference 1 and 2 and Speaker setting displays see Display informationOn-screen displays Basic operations in on-screen display DVD on-screen display during playback Parental Lock on-screen display seeVideo CD on-screen display during playback On-screen guide icons To prevent the monitor from burning outAbout invalid operation icon Playable disc types Preliminary knowledge about discsPlayable discs Non-playable discs Disc construction Example audio CD/video CD Track Getting started Connections Before making any connectionsYellow Video Red White Connect Y to Y, PB to PB, PR to PR To connect to an audio amplifier or receiver Connection to an audio amplifier or receiverUnit Red White Audio cable Supplied Amplifier or receiver Center Subwoofer Front To connect to audio equipment with a digital input White To connect the power cord Turn on the unit Precautions for the safe use of batteries To install batteries in the remote control unitPrecaution Power To turn on/off the unit Using the remote control unit To use the remote control unit for TV operationManufacturer code list Changing the remote control signal Manufacturer’s code list Set DVD Catv on the remote control unit to CatvPress and hold Power Then press SET Do not release Keep holding Power Getting started Basic operations Press Power to turn on your TV Press Power to turn on the unitBefore operation To turn on your TV and the unit Inserting and removing discs To insert or remove discsPress Close to close the disc tray Information about the opening display Playing back a DVD Video or CD disc To playback a disc from the beginningTo stop playback completely Press Stop To stop playback temporarily To advance or reverse play rapidly while monitoringTo locate the beginning of the scene or song Press Pause 7During stop mode Resuming playbackPress Resume Unit starts playback from the stored position Adjusting the surround sound Press to adjust the effect levelSelected effect mode To simulate the surround sound 3D Phonic How to use numeric buttons Summary of basic operationsPress Numeric buttons are used to select a track or title number To adjust the picture quality VFP To playback a scene close-up ZoomTo select a scene angle from the angle list display To select the subtitle language Subtitle Playing a specific scene on a DVD disc To locate the desired scene from the menuPress Use to select the desired item, then press Enter When is displayed in the TV screen Use 1 to 10 , +10 to select the desired title numberUnit begins playback from the selected title Title you have selected is not contained in the disc When is displayed in the TV screen in step When the chapter number is incorrect in stepTo return to the regular display To locate the desired scene by specifying the time When appears in the TV screen in step When you make a mistake in step7The unit starts playback from the selected time Use To select When you want to check moreDesired title Playing in slow-motion To display still pictures StrobeTo playback in slow-motion Slow Press Pause , then press SLOW+ Playing a scene close-up To playback a scene close-up ZoomPress Zoom Use to move the zoomed-in scene To repeat a title or chapter Repeat Repeat playbackUse to move to REPEAT, then press Enter To cancel A-B repeat playback To repeat a desired part A-B Repeat Viewing from multiple angles To select a scene angle from the on-screen display AnglePress Angle Press Angle or to select the desired angle Use to move to Angle When appears on the TV screen in step Press and hold Angle for more than 1 secondsUse to select desired angle Press Enter Selected angle appears on the TV screen To select the subtitle language Subtitle Changing the language and soundUse to move to Subtitle To select the desired Use to move Audio Use to select desired audio language or soundTotal number Selected audio number Adjusting the picture to suit preferences To adjust the picture quality VFPPress VFP or Processor on the front panel By pressing VFP or on the front panel Setting and adjustment Move to select the item you want to set by using Press to select the setting you wantSelecting preferences Press Stop to stop the unit Preference 1 can be set as follows To set the language and display preference itemsSelected language Selected language Japanese = language code from AA toSpanish French On Screen Guide Preference 2 can be set as follows To set other preference itemsPlayback discs Output L0/R0 Lt/RtAudio is played back as it was recorded Mode Picture is scrolledPicture is not scrolled Picture gets dark AV Compulink Mode Auto standby function is off Speaker setting When you connect to a 2-channel amplifier, or use 2 speakers Bass redirect available only when selecting Expert Speaker size available only when selecting ExpertWoofer Speaker level available only when selecting Expert Delay available only when selecting ExpertTo exit the speaker level or delay setting mode Woofer sub-woofer Test tone available only while setting Level or Delay Select Test Tone using Then pressTo exit the test tone mode Color of Test Tone changes Limiting playback by children To set Parental Lock for the first time Parental LockPress Enter while holding down Stop Use to select the CA for country code and press To change the settings Parental Lock New setting is effectiveUse to move to Set Level, then use to select the parental lock level Enter your 4-digit password using 0 to If you select YES, moves to the Password fieldWhen selecting NO, press Close button to remove the disc To temporarily release the Parental lock Parental Lock To select the time display mode Time Select To playback only the beginning of each track Intro To locate a desired track using Next or Previous Select a desired track number usingPlaying a specific track on a disc To locate a desired track directly To locate a desired position by specifying the time Use 0 to 9 to selectTime minute and second then press Enter Use to move to Time Search and press When you make a mistake in step To playback in the desired order Program Changing the track orderPress Play to start program play Unit can play tracks in random order 7During stop mode To playback tracks in random order RandomUse to move to Random Color of Random changes Random play begins To repeat a current track or all tracks Repeat To quit repeat playback Press Enter at the end Use to move to A-BPart you want to repeat point B Sampling all tracks Use to move to IntroColor of Intro changes To stop Intro scan To select the time display mode Time Select Use To move What is CD TEXT? Information about CD Text Audio CD operations Video CD operations Playing a specific scene on a Video CD To use the menu of the Video CD recorded on PBCUse Desired number of the item To locate a disired track directly During playback without the PBC function or stop modeDuring playback without the PBC function Use to move to Time Search and press Time search function does not work during PBC playback Use to select the desired track When you want to check more Scenes, press . AdditionalUnit begins playback from the selected track Unit play the slowest speed, and each time you press To cancel zoom play Press Zoom You can program tracks during playback Unit can play tracks in random order 7During stop 7Random play beginsTo stop random play Press Stop Use to move to Repeat 7During playback without PBC function To cancel A-B repeat To playback only the beginning of each track Intro To stop Intro scan Press Stop By pressing VFP or Processor on Front panel Selected of the picture quality tab lights up in yellow To change the audio channel Audio Select the audio channels to be played back usingSelected audio channel Checking the total disc time Use to move to Time SelectPress Enter until Total Remain appears on the TV screen Total disc time appears on the TV screen Care and handling of discs Troubleshooting Connection and setup How to handle discs Maintenance of discsCare and handling of discs Even on label side Troubleshooting Symptom Possible case Remedy AV Compu Link remote control system Connection and Setup Operation Specifications Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock Page EN. FR 0299TTMUBNPRI