Panasonic DP-2310, DP-3010 manual Quick Operation Chart

Getting To Know Your Machine

Operation Chart

■Quick Operation Chart

1	Face Up	2
From
ADF
		COPY
	Tray	If set in other
or		function mode
	Max. 50 originals*

Turn the Main Power Switch On

(Back side of the Copier) (See page 8)

Turn the Power Load Paper Switch On

(Left side of the Copier)

	Original Guides
	Adjust to the original’s width
			Original Guides
From
		INV	INV	LTR	LGL	LDR
Platen		INVOICE	INVOICE-R	LETTER-R	LEGAL	LEDGER
	INV
	INV
	LTR		LETTER
	LTR
	LGL
	LDR

*30 originals (Legal/Ledger)

Face Down

●If the original is not positioned properly, a portion of the original may not be copied.

●For originals smaller than Invoice size, position the original within the Invoice area and select Invoice.

●Adding Paper (Paper Tray)

1

4

2

Paper Weight: 16-24 lb

3

4

Max Level Indicator

Paper Capacity: 550 Sheets (20 lb)

NOTE:

When changing the paper size, refer to page 60.

●Adding Paper (Sheet Bypass)

Copying on Special Paper, etc.

1

Sheet Bypass

4

Side Guides

10

2

Until it Stops

Adjust the side guides.

Incorrect adjustment may cause the paper to wrinkle, misfeed or skew.

NOTE:

If the paper size is not detected, remove paper and press Reset Key. Then, load the paper again.

3

Face Down

4

Load Paper

(Do not exceed limit mark)

Approximately up to 50 Letter size sheets/20 lb Paper Weight: 15-35 lb

To add paper to the Sheet Bypass, remove the paper left on the tray, and align it with the added paper and load them together onto the tray.