Panasonic DP-2310, DP-3010 manual Printer Settings

Function

For Key Operator

■Printer Settings

Screen		Modes	Function	Initial
No.				Setting
	00	Printer Settings Print	Sets the printer status printout.	Start
			● Stop, Start
	01	Job Completion Time	Sets the job completion time setting.	180
			● 1~ 999 sec.
01/03	02	Page Protection	Compress automatically then printout.	Off
			● Off, On
	03	Error Page Print	Sets the error page printout.	On
			● Off, On
	04	Spool Function	Sets the spool function.	On
			● Off, On
	05 Text Print		Prints text page only.	On
			● Off, On
	06	PS Configuration Print	Sets the status page print of PS.	Start
			● Stop, Start
	07	Font List Print (PCL)	Sets the font list print of PCL.	Start
02/03			● Stop, Start
	08	Font List Print (PS)	Sets the font list of PS.	Start
			● Stop, Start
	09	Mailbox Data Holding	Sets the automatic holding function of mailbox	7 days
			data.∗
			● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
			7 days
	10	Delete Mailbox Data	Sets delete the mailbox data.∗	Before
			● All, Before
03/03	11 Print Queue Delete		Sets authorization to delete the print queue.	Key op.
			● Free, Key op. (operator)
	12 AppleTalk Zone Name		Inputs an AppleTalk Zone name.∗∗
			● Maximum 32 characters

NOTE	● The Key Operator ID Code is required before any changes can be made to items on this
	page.

∗Functions 09 and 10 are available when optional Hard Disk Drive (DA-HD30) is installed.

∗∗ When function No. 12 is set, cycle the power by turning the Power Switch on the Left Side of the machine OFF and ON.

58