Panasonic DP-2310, DP-3010 manual Other Features, Concurrent Copying, Skyshot Mode

Making Copies

Other Features

■Concurrent Copying

The next copy job can be reserved even if the current copy job is not completed.

(Requires the optional Hard Disk Drive and Image Memory (See page 65) to be installed)

1st job

1st job Copy

1st job	2
1
or	Select Function

2nd job Reserve 2nd job

■Energy Saver (Power Save Mode, Sleep/Shutdown Mode)

These modes save power while the copier is not in use.

1 Power Save Mode	Sleep/Shutdown Mode∗	To clear 2
or	Automatically enters the Sleep/
	Shutdown Mode after 15 minutes
	from the last copy job.

Enter

Indicator

Flash: Power Save Mode

Light: Sleep/Shutdown Mode

Modes	Power Consumption	Warm Up Time
Normal Operation	Approx. 140 Wh	N/A
Power Save	Approx. 28 Wh	Approx. 30 sec.
Sleep	Approx. 18 Wh	35 sec.
Shutdown	Approx. 3 Wh	35 sec.

The machine will not go into Sleep/Shutdown Mode when the Weekly Timer is selected.

■Skyshot Mode

Skyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF is opened. Two types of Skyshot modes can be selected;

Digital Skyshot Mode : The scanning area (size) is not pre-determined.

Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.

Digital Skyshot Mode

NORMAL

Default setting (usually select this mode). QUALITY∗∗

For better definition, select the Quality mode.

The default setting of Digital Skyshot Mode is “NORMAL”. In this setting, the unit scans once. If there are black areas around the borders in the copies, set the Digital Skyshot Mode to “QUALITY” to soften the dark borders. In this setting, the unit scans twice.

(See page 52)

12

Opening the ADF

Number of Copies (Max. 999)

NOTE

48

∗Sleep Mode/Shutdown Mode and entering timer can be selected by the key operator.

(See page 55)

∗∗When copying the Quality mode combined with 1 2, BOOK 2, 2PAGE, N in 1, “Quality” mode will be changed to “Normal” mode.

●An incorrect exposure may occur when there is a black line at the edge of the original or an image which the copier interprets as a black pattern in the skyshot mode.