Panasonic DP-2310, DP-3010 manual Modes Function Initial Setting

Function

For Key Operator

■General Settings

Screen		Modes	Function		Initial
No.					Setting
	20	Date Time Setting	Sets the registered date and time.
			●Month, Day, Year, Time
	21	Weekly Timer	Sets the weekly On/Off timer.	Off
			●Off, On (Set)
05/08	22	Daylight Time	Sets the daylight time.	Yes
			●No, Yes
	23	DHCP Default	Sets the DHCP.	Yes
			●No, Yes
	24	TCP/IP Address	Sets user IP address.∗∗	0.	0.	0.	0
			●3 digits x 4
	25	TCP/IP Subnet Mask	Sets the subnet mask.∗∗	0.	0.	0.	0
			●3 digits x 4
	26	TCP/IP Default Gateway	Sets the gateway address.∗∗	0.	0.	0.	0
			●3 digits x 4
06/08	27	DNS Server Address	Sets the DNS server.∗∗	Yes
			●No, Yes
	28	MAC Address	Indicates the MAC address.
	29	Hard Disk Format	∗ Selects the HDD format	Stop
			●Stop, Start
	30	Hard Disk Error Check	Selects the HDD error check	Stop
			●Stop, Start
	31 Address Book Group ID		Inputs address book group ID.	0
			●0 ~ 99
	32 Tandem User Parameter		Inputs the Tandem User Parameter.
07/08
	33	Community Name (1)	Selects to change the SNMP of Community	public
			Name (1).∗∗
			●Enables read only.
	34	Community Name (2)	Selects to change the SNMP of Community	public
			Name (2).∗∗
			●Enables read/write.
	35	Device Name	Input the device name when required.∗∗	Panasonic
08/08			(For Status Monitor/EtherTalk Machine Name)	DP-2310 or DP-3010
	36	Device Location	Input the device location when required.∗∗

(For Status Monitor)

NOTE	● The Key Operator ID Code is required before any changes can be made to items on this
	page.

∗Not required in copying mode, but needed when installing options with advanced functions (See page 65).

∗∗When functions No. 24 to 27 and No. 33 to 36 are set, cycle the power by turning the Power Switch on the Left Side of the machine OFF and ON.

56