Panasonic FP (Sigma) manual Optimised Temperature Control, FPΣ Sigma control unit

Optimised Temperature Control

Functions convenient for temperature control are built in

The control unit with thermistor inputs enables temperature control at low cost

Two thermistor inputs, which cost less than thermocouples, can be connected to the FPΣ (Sigma) unit via thermistor inputs (FPG-C28P2HTM, FPG-C32T2HTM and FPG-C24R2HTM).

FPΣ (Sigma) control unit

FP• control unit that

thatacceptsthermistors

Thermistor

Using a simple linearization command, measuring

the temperature by the thermistor can be programmed easily.

Four- and eight-channel type thermocouple input expansion unit

Up to three units can be added to each control unit, enabling temperature control of up to 24 channels.

Advantages over multiple temperature controllers:

Information collection and computer-based storage.

On-site error monitoring using programmable display.

Significant reduction in total costs.

Power supply stabilisation by protecting synchronisation between heater ON and OFF states.

Temperature settings can be easily changed using batch function.

Optimised temperature control with PID and PWM instruction

You can easily set multi-stage temperature control and time control usually available only in high performance type temperature controllers.

With the built-in PID and IPD algorithms, temperature can be controlled more accurate than ever.

Example of temperature control with the auto-tuning function only

02/2006 11