•For a detailed description of con- necting the individual devices, refer to their Operating Instructions.
•Connect the supplied AC cable to the AC 120V inlet. Plug the AC cable to an AC outlet, and press the power switch on the adapter to the ON position.
Pan/tilt Head AW-PH300
Lamp Control Cable |
|
|
|
(Nominal cross section 0.3 mm2 or |
|
|
|
more, to be locally purchased) |
|
|
|
* Unnecessary if lamp control is |
|
|
|
not needed. |
|
|
|
Option switch control cable |
|
|
|
(Nominal cross section 0.3 mm2 or |
|
|
|
more, to be locally purchased) |
|
|
|
* Unnecessary if option switch |
|
|
|
control is not needed. |
|
|
|
AC IN |
|
| LAMP AC OUT |
|
|
| |
OPTION SW OPTION | SW | LAMP | DC 15V |
CONTROL OUT CONTROL IN | CONTROL | OUT | |
OP |
| C S | + − |
Halogen Lamp
DC cable
(Nominal cross section 1.25 mm2 or more, to be locally purchased)
AC Cable (supplied)
120V AC 60Hz
100V 500W
Option Unit
Locally purchase an AC plug conversion cable that matches the halogen lamp AC plug.
*Unnecessary if no halogen lamp is con- nected.