Panasonic AW-DU600 manual Connection procedure, Menuj 5 Output-1 J 2 3 2 C R S j 4 2

Connections

Connection procedure

1.	Connect the pan-tilt head system to the CONTROL	5. The pan-tilt head system can be controlled in the
	OUT connector on this adapter.	following ways using the operating keys on this adapter.
2.	Turn on the power to this adapter and the pan-tilt head
	system.

3.Dial Up Adapter settings

1 Set this adapter to direct mode.

Press the MENU+ key ( 2 i START ) to open the menu settings.

When “Menu-1 Function” appears on the LCD panel,

use the !			# keys and select
	START	STOP
Direct (direct mode).

1

M1

TELE

4

M4

7

WIDE

START STOP

MENU MENU

CLEAR RECALL

2 3

M2 M3

FAR

5 6

M5

8 BAR 9

NEAR

0

DEL

CAM

Menuj 1	Function
T x R x	D i r e c t

2Set the CONTROL OUT connector according to the type of pan-tilt connected and the connection distance.

Press the MENU+ key ( 2 i START ) to change the menu setting item.

When “Menu-5 Output-1” appears on the LCD panel,

use the !			# keys and select
	START	STOP

RS-2332C or RS-422 according to the pan-tilt head system to be connected.

2	(:):	Up
8	(;):	Down
4	(!):	Left
6	(#):	Right
1	(TELE):	Zoom in
7	(WIDE):	Zoom out
3	(FAR):	Focus (long-distance)

9(NEAR): Focus (close-up)

5(BAR): Color bar output

0(CAM): Camera thru output

Menuj 5 Output-1

R S j 2 3 2 C R S j 4 2 2

3Select the pan-tilt head system to be controlled. Press the MENU+ key ( 2 i START ) to change the menu setting item.

When “Menu-6 Output-2” appears on the LCD panel,

use the !			# keys and select
	START	STOP
P1, P2, P3, P4 or P5.

	Menuj 6			Output-2
	P 1 P 2			P 3 P 4 P 5
When the settings are completed, press the
						MENU+
key ( 2 i			) once again to exit		the menu
		START
settings.

4.When the settings are completed, turn the power of the AW-DU600 off and then back on again.

The power of the pan-tilt-head system turns on and operation is possible.

14