Panasonic AW-DU600 Attaching the rack mounting adapters, Changing the position of the rear panel

Attaching the rack mounting adapters

To install the adapter in a rack, use the rack mounting adapters and four of the mounting screws (M4) supplied.

Screw

Rack mounting adapter

Changing the position of the rear panel

1.Remove the three screws from the bottom panel and remove the blank panel.

Screws

Blank panel

3.Use the three screws to firmly secure the rear panel where the blank panel was removed from the bottom

panel.

Screws

	RS-232C CONTROL OUT
	TO CAMERA & PAN/TILT HEAD				TO MODEM		IN PUT
							TO RCB/PC
							DC 12V IN
P5	P4	P3	P2	P1
		RS-422 CONTROL OUT
	TO CAMERA & PAN/TILT HEAD				TO CONTROL PANEL
						A
						B	GND
P5	P4	P3	P2	P1	PAN/TILT		CAMERA
		OUT PUT			CONTROL IN		CONTROL IN

2.Remove the three screws from the rear panel and remove the rear panel.

Screws

4.Use the three screws to firmly secure the blank panel where the rear panel was removed.

Screws

	RS-232C CONTROL OUT
	TO CAMERA & PAN/TILT HEAD				TO MODEM		IN PUT
							TO RCB/PC
							DC 12V IN
P5	P4	P3	P2	P1
		RS-422 CONTROL OUT
	TO CAMERA & PAN/TILT HEAD				TO CONTROL PANEL
						A
						B	GND
P5	P4	P3	P2	P1	PAN/TILT		CAMERA
		OUT PUT			CONTROL IN		CONTROL IN

Blank panel

Take care not to catch the internal wiring when reattaching the panels.

19