FP-e Series
Optimised for a wide range of applications
Equipped with RS485 and RS232C interfaces
● Up to 99 computer link stations are possible with | ● With RS232C, communication with up to two ports | |||||
RS485. (RS485 type) | is possible. (RS232C type) | |||||
Up to 32 computer link stations are possible using a |
|
|
|
|
|
|
|
|
|
|
|
| |
commercially available adaptor. You can easily |
|
|
|
|
| Personal Computer |
|
|
|
|
| ||
monitor operation status or perform control. |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
Computer link
RS232C
Commercially
available adaptor
RS485
Personal Computer
RS232C | RS232C |
Tool port COM. port
Can even handle temperature control
●Two-point K-type thermocouple (-30 to 300°C)
connection is possible.
Can be used in place of a temperature controller or used to control them.
As
temperature
controller
●PID instruction function
Y0
PID instruction
|
| Temperature | Temperature |
As | controller, etc | controller, etc | |
|
|
| |
a controller for |
|
|
|
temperature |
|
|
|
controller |
| OFF | OFF |
|
| OUT | OUT |
|
| MODE | MODE |
|
| KT4 | KT4 |
Up to 32
RS485controllers
A0
Heater
Thermocouple input
∗Compatible with MODBUS, it can be used as a slave.
Equipped with
●Pulse output function
The unit comes equipped with 2 channels for pulse output of up to 10 kHz pulses.
Since these two channels can be separately controlled, the
●High-speed counter function
In single phase, the
(One half for the type with thermocouple input.)
Pulse output
Y0
CW/CCW output
Y2
Pulse output
Y1
CW/CCW output
Y3
Motor
driver 1
Stepping motor
Servo motor
Motor
driver 2
| Feeder roller | Cutter | |
|
| Lead wire | |
|
| and tape | |
Motor | Inverter |
| |
|
| ||
Encoder | START/STOP | Cutter blade | |
signal | |||
control signal | |||
|
|
Input encoder output into the
| Clearwater | Tech | - | Phone: | 800.894.0412 | - | Fax: | 208. | 01/2004368.0415 | - | Web: |
| www.clrwtr.com |
|
|
| - | Email: |
|
| info@clrwtr.com |
|
|
| 3 |
|
|
|