Panasonic 4520, 6020 manual Job Build and Sadf Mode, Combination of Multi-Size Feeding

Making Copies

2-Sided/Original Copy

■Multi-Size Feeding

Use this function when copying mixed Ledger/Letter

size originals using the ADF. Original size can be 1 detected automatically then can be copied full size (1:1) or same size.

Combination of Multi-Size Feeding

Originals		Copies
	Full Size	Reduction	Enlargement
Legal	Legal	Letter-R/Invoice	Ledger
Letter-R	Letter-R	Letter-R/Invoice	Ledger
Ledger	Ledger	Letter/Letter-R	—
Letter	Letter	Letter/Letter-R

2

Reduction/ Enlargement only

■Job Build and SADF Mode

Special originals (like thin paper, etc.) can be fed from the ADF Tray and copied continuously using the Job Build and SADF Mode.

If the Job Build and SADF buttons are not shown on the Touch Panel display, the Job Build and SADF Modes must be enabled in the copier function settings, please consult with the key operator. (See page 67)

1

2

Place one Original at a Time or up to 70 sheets (20 lb)

Reduction/ Enlargement only

Example: To make 5 sets of sorted copies of 100 sheets of originals. (Letter size)

70

100

1

1

Originals: 70 sheets <1st scan>

100

71

1st and 2nd Scanned Data are combined into one job.

Originals: Remaining 30 sheets <2nd scan>	5 sets of 100 sheets
	sorted copies are printed

1

2

Place the first 70 sheets of originals on the ADF Tray.

NOTE

●Multi-Size Feeding Function cannot be combined with another 2-sided/original copy function.

●Job Build and SADF function cannot be combined with 2 1 and 2 2.

42