Panasonic 4520, 6020 manual Function

Function

For Key Operator

■General Settings

Screen		Modes	Function	Initial
No.				Setting
	30 Sleep/Shutdown Select		Selects the Sleep/Shutdown mode.	Sleep
			● Sleep, Shutdown
	31	Print General Settings	Sets the print of general function.
07/09			● Stop, Start
	32	Corona Wire Cleaning	Sets the corona wire cleaning.
			● Off, On
	33	MAC Address	Indicates the MAC address.
	34	Address Book Group ID	Inputs group ID for address book.	0
			● 0 ~ 99
	35	Tandem User Parameter	Inputs parameter of user machine.
	36	Community Name (1)	Selects to change the SNMP of Community
			Name (1).∗
			● Enables read only.
08/09	37	Community Name (2)	Selects to change the SNMP of Community
			Name (2).∗
			● Enables read/write.
	38	Device Name	Inputs the device name when necessary.∗
			(For Status Monitor/EtherTalk Machine Name)
	39	Device Location	Inputs the device location when necessary.∗
			(For Status Monitor)
	40	Daylight Time	Sets the daylight time.	No
			● No, Yes
	41	Routing Menu Function	Selects the Document Distribution function∗∗.	No
09/09			● No, Yes
	42	Doc. Dist. Server Name	Inputs the Document Distribution System
			routing server name.
	43	Doc. Dist. Server IP	Inputs the Document Distribution System	0. 0. 0. 0.
			routing server IP address.
			● 3 digits x 4

NOTE	●The Key Operator ID Code is required before any changes can be made to items on this
	page.

∗When Functions No. 36 to 39 are set, cycle the power by turning the Power Switch on the Left side of the machine OFF and ON.

∗∗When the optional Document Distribution System (DA-WR10) is installed.

66