Panasonic 4520, 6020 manual Other Features, Concurrent Copying, Skyshot Mode

Making Copies

Other Features

■Concurrent Copying

The next copy job can be reserved even if the current copy job is not completed.

(Requires the optional Hard Disk Drive (See page 75) to be installed)

1st job

1st job Copy

1st job	2
1
or	Select Function

Reserve

2nd job

2nd job

■Energy Saver (Power Save Mode, Sleep/Shutdown Mode)

These modes save power while the copier is not in use.

1 Power Save Mode Sleep/Shutdown Mode∗ To clear 2

Automatically enters the Sleep/

or Shutdown Mode after 15 minutes from the last copy job.

Enter

Indicator

Flash: Power Save Mode

Light: Sleep/Shutdown Mode

●Power Consumption and Warm Up Time while in the Power Save Mode or Sleep/Shutdown Mode, refer to page 86.

●The machine will not go into Sleep/Shutdown Mode when the Weekly Timer is selected.

■Skyshot Mode

Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened. Two types of Skyshot modes can be selected:

1) Digital Skyshot Mode : The scanning area (size) is not pre-determined.

2) Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance.

Digital Skyshot Mode

The Digital Skyshot has 2 modes ( copy or copy ).

The default setting of Digital Skyshot Mode is “Freeshp”.

Before using this mode, select each setting by using the Function setting.

1

Set original on Platen Glass

2

Number of Copies

No	: None
Freeshp (Free shape) : Copy is made with a slant.		copy
Parallel	: Copy is made in a straight line. copy
	(within 5 degrees)
(See page 61)

(Max. 999)

NOTE	∗ Sleep Mode/Shutdown Mode and timer setup is performed in the key operator mode.
	(See page 64)

●An incorrect exposure may occur when there is a black line at the edge of the original or an image which the copier interprets as a black pattern in the skyshot mode.

56