Panasonic CF-VDL02BM specifications Position, Image, Auto Center, Phase, Clock

(Position)

Image Position

H-Position

V-Position

Auto Center

(Image)

Image

Phase

Clock

Auto Phase

The Position menu allows the adjustment of image po- sition in Analog input mode.

Select the item by pressingor, then press .

H-Position

H-position is used to adjust the horizontal image posi- tion manually. A slider and the current value are dis- played. The adjustment range is 0 to 127.

Adjust by pressingor, then press . (To cancel, press and then turn off the power to the LCD Monitor. When the power is turned on again, the operation will be canceled.)

V-Position
V-position is used to adjust the vertical image position
manually. A slider and the current value are displayed.
The maximum value for Vertical Position is to 1 to 47.
			E
(Depending on the RGB input signal, the upper value
of this range may be below 47.)
Adjust by pressing or , then press . (To cancel,
press	and then turn off the power to the LCD Moni-
tor. When the power is turned on again, the operation
will be canceled.)
Auto Center
A confirmation box is displayed. The default selection
is [Yes]. Press		to adjust the position automatically.

If you want to cancel, select [No] and press .

To save the adjusted value, select [H-Position] or [V- Position], then press .

The image menu allows the adjustment of ADC clock and phase in Analog input mode.

Select the item by pressing or , then press .

Phase

Phase adjustment is used to adjust the phase of ADC sample pixel clock. A slider and the current value are displayed. The adjustment range is 1 to 31, representing 0-360 degrees. Adjust by pressing or, then press . (To cancel, press and then turn off the power to the LCD Monitor. When the power is turned on again, the operation will be canceled.)

Clock

Clock adjustment is used to adjust the number of ADC sample clocks per line (samples per line). A slider and the current value are displayed.

Adjust by pressing or, then press . (To cancel, press and then turn off the power to the LCD Monitor. When

the power is turned on again, the operation will be canceled.) 15