Troubleshooting
When a problem occurs, refer to this page. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic Technical Support.
No display after power- | Check the cable connection for the car adaptor. |
ing on | Check the cable connection to the LCD Monitor. |
or | Check the brightness of the LCD Monitor. |
If the LCD of the computer is ON, press Fn + F3 . | |
“Cable not connected” is | Has the computer been set to the |
To resume operation of your computer from the condition | |
displayed | the power of the display is OFF (for energy conservation |
| purposes), press any key (like Ctrl ). |
| Set the |
| Windows XP |
| Set [Turn off monitor], [System standby] and [System hi- |
| bernates] in [start] - [Control Panel] - [Performance and |
| Maintenance] - [Power Options] to [Never]. |
| Windows 2000 |
| Set [Turn off monitor], [System Standby], and [System |
| hibernates] in [Start] - [Settings] - [Control Panel] - [Power |
| Options] to [Never]. |
An afterimage appears | If an image is displayed for a prolonged period of time, an |
(i.e., green, red, and blue | afterimage may appear. This is not a malfunction. The |
dots remain on the dis- | afterimage will disappear when a different screen is dis- |
play) or there are dots | played. |
not displaying the cor- | |
rect colors | in the production of color liquid crystal displays (color |
| LCDs). Therefore, if 0.002% or less of the picture ele- |
| ments either fail to light or remain constantly lit (that is, |
| more than 99.998% of elements are functioning properly), |
| no defect is considered to exist. |
The sound is not heard | Check the cable connection to the LCD Monitor. |
| Check the volume setting of the computer and the LCD |
| Monitor. |
“Input Not Supported” | The mode not supported is has been selected. |
is displayed | Set the display mode to 640 × 480 60 Hz, 800 × 600 60 Hz |
| or 1024 × 768 60 Hz. |
|
|
E
17