Panasonic CF-VDL02BM Auto Phase, Auto Configuration, Miscellaneous, Init NVRam, OSD Timeout

Adjusting the LCD Monitor

			Auto Phase
			A confirmation box is displayed. The default selection
			is [Yes]. Press	to adjust the phase automatically. If
			you want to cancel, select [No] and press .
			To save the adjusted value, select [Phase] or [Clock],
			then press .
	(Auto Configuration)
			Auto Configuration automatically adjusts image posi-
	Auto Config
	Yes	No	tion, clock, and phase.
			A confirmation box is displayed. The default selection
			is [Yes]. Press	to execute the menu. If you want to
			cancel, select [No] and press .
	(Miscellaneous)		To save the adjusted value, select [Brightness], then press .
			Select the item by pressing		or	, then press .
	Miscellaneous
E			Init NVRam
	Init NVRam
	OSD Timeout		All values of the OSD menu are set to default.
	OSD Position		A confirmation box is displayed. The default selection
			is [Yes]. Press	to execute the menu. (If you want to
			cancel, select [No] and press		.) This setting is acti-
			vated by turning off the power to the LCD Monitor and
			then turning the power back on again.
			OSD Timeout
			OSD Timeout is used to set the OSD idle time-out. If
			no active action, key press or automatic configuration
			occurs for the defined period, the OSD menu is closed.
			There are four OSD time-out values available.
			Select the item by pressing		or	, then press .
			OSD Position
			The sub-menu is displayed.
			Select the item by pressing		or	, then press .
			The sub-menu is displayed.
			Adjust the OSD Position by pressing			or	, then press
			. (To cancel, press and then turn off the power to
			the LCD Monitor. When the power is turned on again,
	(Information)		the operation will be canceled.)
			This menu is used to display information about the sys-
	Information
	Version:		tem. The OSD window is displayed. If				is pressed,
	V-Freq-:		the information window is closed and the main menu is
	H-Freq-:		displayed.
	PixelCLk:
	Width:
	Height:

3Press

16The OSD main menu disappears.