Panasonic CF-VDL02BM specifications Troubleshooting

Troubleshooting

E

Unable to input by	Check the cable connection to the LCD Monitor.
touching the display	Confirm that the [Serial Port] has not been set to [Dis-
	able] in the Setup Utility.
	Confirm that the setting for resource in [UPDD]*1 - [Set-
	tings] - [Hardware] and the setting of the Serial Port in the
	Setup Utility are the same.
	*1 Windows XP		: [start] - [All Programs] - [UPDD]
	Windows 2000		: [Start] - [Programs] - [UPDD]
The display is affected	The mode not supported has been selected.
	Set the display mode to 640 × 480 60 Hz, 800 × 600 60
	Hz or 1024 × 768 60 Hz.
	Check the cable connection to the LCD Monitor.
The screen is shifted	Select	on the OSD main menu and perform fine
horizontally or verti-	adjustments.	(	page 15)
cally.
The display no longer	Select	from the OSD main menu, then select [Init
displays properly	NVRam], then press .
	Select [Yes], then press .
	Turn off the power to the LCD Monitor and then turn the
	power back on again. (			page 16)

18