Panasonic BT-LT900A manual System Config, Gpi

MAIN MENU

SYSTEM CONFIG OSD CONFIG

Item	Setting			Description
BACKLIGHT	0	For adjusting the backlight brightness to a
	:	level from 0 to 60. The higher the setting,
	60
		the brighter the backlight.
FUNCTION	WFM	For setting the function to be allocated to
	ON/OFF	the FUNCTION/ENTER button.
	HV DELAY	WFM ON/OFF: The Y signal			(luminance)
	UNDEF			waveforms are displayed.
		HV DELAY: The blanked			parts of	the
				images are displayed.
		UNDEF:		No function is allocated.
WFM	FUNCTION	For selecting whether the Y signal
	GPI	(luminance) waveforms are to be displayed
		using the FUNCTION/ENTER button or
		from the GPI connector.
		FUNCTION: The waveforms are displayed
				using the FUNCTION/ENTER
				button.
		GPI:		The operations are performed
				from the GPI connector. For
				details, refer to “REMOTE
				specifications” (page 22).
HD ZOOM	FRONT	For selecting whether the HD ZOOM
	GPI	function is to be operated using the HD
		ZOOM/X button or from the GPI connector.
		FRONT: The function is operated using the
			HD ZOOM/X button.
		GPI:	The operations are performed from
			the GPI connector. For details,
			refer to “REMOTE specifications”
			(page 22).
PEAKING/ PHASE	PEAKING	For selecting the PEAKING or PHASE
	PHASE	function for the image control.
		PEAKING: The PEAKING			function	is
				allocated to the control.
		PHASE: The PHASE function is allocated
				to the control.
USER MODE	USER5	For calling the file in which the user data is
LOAD	USER4	stored.
	USER3	USER1-5:		These are the files in which the
	USER2			user has stored data. If the user
	USER1			data has not yet been stored,
	FACTORY			the settings are the same as the
				ones in the FACTORY file.
		FACTORY: This file contains the factory
				settings.
USER MODE SAVE	USER5	For saving the user data.
	USER4
	USER3
	USER2
	USER1

The underlined setting indicates the factory setting mode.

Item	Setting	Description
BATTERY REMAIN	OFF	For selecting whether to display the
	ON	remaining battery charge.
		OFF: The remaining charge is not displayed.
		ON: The remaining charge is displayed.
STATUS DISPLAY	CONTINUE	For setting how long the status display is to
	3SEC. OFF	remain on the screen.
	OFF	CONTINUE: The status display appears
		continuously at all times.
		3SEC.OFF: The status display appears for
		three seconds.
		OFF: The status display does not appear.
CRCC MESSAGE	OFF	For selecting whether a message is to be
	ON	displayed when a CRCC error has been
		detected.
		OFF: A CRCC error message is not displayed.
		ON: A CRCC error message is displayed.
MENU POSITION	LT	For setting the menu display position.
	CENTER	LT: The menu is displayed at the top left.
	LB	CENTER:
	RB	The menu is displayed in the center.
	RT	LB: The menu is displayed at the bottom left.
		RB: The menu is displayed at the bottom right.
		RT: The menu is displayed at the top right.
STATUS POSITION	LT	For setting the status display position.
	CENTER	LT: The menu is displayed at the top left.
	LB	CENTER:
	RB	The menu is displayed in the center.
	RT	LB: The menu is displayed at the bottom left.
		RB: The menu is displayed at the bottom right.
		RT: The menu is displayed at the top right.
ROTARY	LB	For setting the display position of the
POSITION	CB	settings when images have been adjusted
	RB	using the image controls.
	RT	LB: The settings are displayed at the
	LT	bottom left.
	CENTER	CB: The settings are displayed below the center.
	OFF	RB: The settings are displayed at the
		bottom right.
		RT: The settings are displayed at the top right.
		LT: The settings are displayed at the top left.
		CENTER:
		The settings are displayed in the center.
		OFF: The settings are not displayed.

GPI

Item	Setting		Description
GPI1-8	UNDEF	For	allocating		particular
	MARKER1 ON/OFF	functions to particular pins
	MARKER2 ON/OFF	when	remote		control
	MARKER BACK HALF	operations		are	to	be
	MARKER BACK BLACK	performed		using	the	GPI
	CENTER MARKER	signals. For details, refer to
	INPUT SEL. SDI1	“REMOTE		specifications”
	INPUT SEL. SDI2	(page 22).
	INPUT SEL. VIDEO
	INPUT SEL. YPBPR/RGB
	SD ASPECT
	HD ZOOM
	BACKLIGHT MIN.
	R.TALLY
	G.TALLY
	MONO ON/OFF
	GAMMA SELECT
	WFM ON/OFF

19