How to use the on-screen menus
Image control display
[CONTRAST]
50
The image control information is displayed when an image has been adjusted using the image controls. (Refer to page 6)
It appears when a control has been pressed in so that it has popped out or when an adjustment is made by turning an already popped out control.
It is cleared when a control is pressed again and returned to its original position. It is also cleared when a popped out control is not touched for 10 seconds.
Battery voltage display
DC150V.
80%
Concerning the signal formats
The battery voltage information is displayed all the time when ON has been selected as the BATTERY REMAIN item setting on the OSD screen of the main menu.
It indicates the voltage level of the battery. If an Anton Bauer digital battery is being used, its remaining level is indicated as a number of “∫” blocks and as a percentage along with the voltage value.
Menu setting | Signals whose input is accepted | Status display | |
|
|
| |
|
|
| |
AUTO | All supported signals | The format of the input signals is displayed. | |
|
|
| |
1080/60I | 1080/60I | 1080/60I | |
|
| ||
1080/59.94I | 1080/59.94I | ||
| |||
|
|
| |
1080/50I | 1080/50I | 1080/50I | |
|
|
| |
1080/30P | 1080/30P | 1080/30P | |
|
| ||
1080/29.97P | 1080/29.97P | ||
| |||
|
|
| |
1080/25P | 1080/25P | 1080/25P | |
|
|
| |
1080/24P | 1080/24P | 1080/24P | |
|
| ||
1080/23.98P | 1080/23.98P | ||
| |||
|
|
| |
1080/24PsF | 1080/24psF | 1080/24PsF | |
|
| ||
1080/23.98psF | 1080/23.98PsF | ||
| |||
|
|
| |
1035/60I | 1035/60I | 1035/60I | |
|
| ||
1035/59.94I | 1035/59.94I | ||
| |||
|
|
| |
720/60P | 720/60P | 720/60P | |
|
| ||
720/59.94P | 720/59.94P | ||
| |||
|
|
| |
720/60P ANAMO | 720/60P | 720/60P | |
|
| ||
720/59.94P | 720/59.94P | ||
| |||
|
|
| |
576/50I | 576/50I | 576/50I | |
|
|
| |
480/60P | 480/59.94P | 480/60P | |
|
|
| |
480/60I | 480/59.94I | 480/60I | |
|
|
| |
NTSC | NTSC | NTSC | |
|
|
| |
PAL | PAL | PAL | |
|
|
|
12