Panasonic DMC-F1PP manual Turning Power on/off, Lighting, Blinking, Set the power switch to on

Page 17

KC42-PP.book 17 ページ２００２年１２月１９日木曜日午後４時３６分

Preparation

Turning Power on/off

1Set the power switch to [ON].

1,2	• The Status indicator 1 lights.
2	Set the power switch to [OFF].
OFF ON

•When the power switch is turned on, do not hold the lens cover. If the lens cover does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.

•When turning the power switch off, do not hold the lens cover. If the lens cover does not close, the power turns off with it opened. Turn the power switch on and off.

•When turning on the power in the recording mode, do not put any obstacle in front of the lens.

ªStatus Indicator A

Lighting:

•When turning the power switch to [ON].

Blinking:

• While the focus is being adjusted or the focus is not properly adjusted.

• When the card is not inserted.

• When no space is left on the card.

• When the remaining battery power is low. (blink slowly)

ªFlash/Access Indicator B

Lighting:

•When accessing the card.

•When the flash fires. (It lights when the shutter is pressed halfway)

•When sending data to PC.

Blinking:

• When charging the flash.

• When setting the flash mode to forced off and recording in dark places (blink slowly.)

17

Image 17

Contents Operating Instructions Dear Customer Information for Your SafetyFCC Note U.S. only Contents Others Standard Accessories21 22 23 24 Names of the Components14 15 16 Bottom View Left ViewRight View Recording LCD Monitor DisplayPlayback Recording in Simple mode4qa6q/10a15cm Recorded date and timePreparation Quick GuideAttach the battery to the AC adaptor Charging the BatteryWhen the Charge indicator B Connect the AC cableInserting the battery Inserting the BatteryRemoving the battery DoorBattery indicator Lens is stored Connecting to an Electrical OutletConnect the AC cable Open the DC in terminal door Connect the DC cable supplied to the cameraRemoving the card Inserting the CardInserting the card Slower than SD cards SD Memory CardMultiMediaCard Set the power switch to on Turning Power on/offLighting BlinkingAttaching the Strap Using the LCD Monitor Parallax compensation mark Using the Optical ViewfinderShutter Button Pressing halfway/Pressing fully Mode Dial Menu will disappear Operating the MenuPress the Menu button Press the Menu button Press 1 to make the setup menu appear Setting the Date/Time Clock Set4,5 Simple mode, skip this stepBy only pressing the shutter button, Set the power switch to ON. P17Will be taken PreparationAbout shutter jiggle Auto Review P71 Beep P72 Clock SET P24 Taking Pictures in Simple ModePress 2/1 to select ENLARGE, 4qa6q/10a15cm, Internet Press the Menu button Take a pictureMotion image mode , Review cannot be used Picture is erased Once erased, pictures cannot be recoveredChecking the Captured Picture Review After taking a picture, press the 4/REVIEW/SET buttonCenter the subject on the LCD Recording Motion ImagesHalfway Recording startsUsing the Optical Zoom 2,3 Using the Digital ZoomPreparation Set the mode dial except for / / . P22 Taking Pictures using the Built-in FlashPress Every time you press , the availableTripod Simultaneously it reduces the red-eyePress 2/ 1 to select on Using the Continuous AFPress the shutter button fully Taking Pictures with the Self-timerPress the button It is not necessary to continue pressing the shutter button Taking Pictures with AudioPress the shutter button fully and take a picture Changing the Picture Size Changing the Quality Data Compression Ratio Macro Mode Taking Pictures using Macro ModeSet the mode dial to Macro mode Take a picture Normal recordingSet the mode dial to Portrait mode Take a picture Taking Pictures using Portrait ModeTaking Pictures. P25 Taking Pictures using Landscape ModeDistances exceeding 32.8 feet 10 m Set the mode dial to Night portrait Mode Take a picture Taking Pictures using Night Portrait ModePicture becomes bluish Taking Pictures using Color Effect ModeCenter the subject in the spot AF area Take a picture Taking Pictures using Spot ModeYou can compensate from -2 EV to +2 EV with 1/3 EV step Compensating the ExposurePress the button Press 2/1 to compensate the exposure Taking Pictures using Auto Exposure AE Bracket When the focus is adjusted, the focus indication 1 ¥ appears Using the AF/AE LockPicture Adjustment Natural/Standard/Vivid Auto Setting the White BalanceWhite balance is set Only when setting the white balance again2,3,4 Setting ISO Sensitivity Preparation Set the mode dial except for / . P22 Taking Pictures using Burst ModeLast recorded picture is played back Playing Back Still PicturesFast forwarding/Fast rewinding You can hear audio from the speaker Playing Back Still Pictures with AudioPress 3/4/2/1 to select images Images Multi PlaybackDuring playback, press the zoom W button During playback, press the zoom T button Using the Playback ZoomTo pause Playing Back Motion Images3,4 Deleting ImagesDelete single image Selected image is deletedDelete multi images Once deleted, images cannot be recoveredDelete all images It is possible to delete up to 50 images all at onceSingle copy setting Writing the Print Information to the Card Dpof SettingTo cancel 2,3,4,5Multi copy setting Index setting/to cancel To cancel all settingsAll Dpof settings are cancelled Displayed Press 2/1 to select SET, Cancel or noProtecting Images on the Card Single setting/to cancelMulti setting/to cancel, To cancel all settings Playing Back with Slide Show Automatic Playback Press 3/4/2/1 for setting below3,4,5,6 Press 3/4 to select ALL/DPOF and then pressKC42-PP.book 65 ページ２００２年１２月１９日木曜日午後４時３６分 Press the 4/REVIEW/SET button, to stop audio recording Adding Audio to Recorded Pictures Audio Dubbing1600 a 1280 a 640 a Resizing Recorded Pictures2,3,4,5,6,7 2,3,5,7,8 Trimming Recorded PicturesPicture trimming, and enlarge Remaining parts of the pictureCard is formatted Formatting the CardAdjusting the LCD Monitor Brightness Using the Auto Review Press the Menu button Press 1 to open the setup menu Setting up the Operational Sound/Shutter SoundMIN 10 MIN OFF The power is not turned off automatically Setting up the Power Save ModeResetting the File Number Press the 4/REVIEW/SET button to set Initializing the settingsClock setting is not reset Yellow to the video in socket White to the audio in socket Playing Back Images with a TV MonitorImage is displayed on the television Read the TV operating instructions tooSuch as Windows ME, Windows 2000, or Connecting to a PCPreparation If your PC uses Microsoft Windows 98 or USB DIRECT-PRINT USB DIRECT-PRINT Single Picture When Dpof is not set, this screen is skippedPreparation Connect the camera to a printer. P78 Press 2/1 to select the picture to bePress 2/1 to select Dpof USB DIRECT-PRINT DpofAfter Use Menu Items REC mode menu14 NO.RESET P74 Reset P75 Clock SET P24 Playback mode menu Simple mode menuDigital camera is not intended for business use Be sure to detach the battery after use Optimal Use of the BatteryDispose of an unusable battery Always keep the terminals of the battery cleanSet the power switch to OFF Condensation Card When condensation has takenAmbient temperature, the fog BatterySD Slide Show LCD Monitor Folder CompositionFailed access to Memory Card. Insert the card again Cancel the Memory Card lock Selected picturesData reading error Play it back again Insert the Memory CardTroubleshooting Digital Camera Information for your safetyCard. MultiMediaCard performance will be less Pixels field of view ratio 100%Panasonic CGA-S001A AC adaptor Panasonic DE-929AAccessory# Description Digital Camera Accessory SystemFor USA Customers Digital Camera Accessory Order FormRequest for Service Notice Limited Warranty Coverage Limited Warranty For USA OnlyCarry-In or Mail-In Service Accessory Purchases Customer Services Directory For USA OnlyAF/AE Lock IndexAuto Review LCD Monitor Brightness10 9 Spanish Quick Use Guide/Guía española para el uso rápidoPreparaciones GrabaciónVQT0B81 F1202Ma0